Skip to Content

Motorola NKN6611 XP RSM Replacement Cable - NMN6271

https://www.magnumelectronics.com/web/image/product.template/127180/image_1920?unique=d315dad
Part Number: NKN6611A

112.83 112.83 USD Replacement Cable for NMN6271, NMN6272, NMN6273, and NMN6274 112.83

112.83

Contact Us for Pricing

This combination does not exist.

Free Shipping in U.S. on most orders over $299

Share:

Motorola NKN6611 Replacement Coiled Cable - XP RSM


(Coiled cord and connector only - does not include the speaker-mic head)


Compatible with XP RSM without 3.5mm audio jack

To detach cable from Remote Speaker Microphone (RSM), remove the screw completely before rotating the collar Use TORX 6IP (T6) tip screwdriver
Note: Earlier versions of this cable may require you to insert a thin tool under the screw head to aid in screw removal

Cable Attachment
1. Align the cable connector with the RSM connector and insert into RSM. Ridge on connector faces the front.
2. Hold the RSM with the front facing you, then position the locking screw such that it faces the front.
3. Move the collar onto the RSM and rotate it into the locked position. The locking screw should now be at the right side of the RSM.
4. Tighten the screw using a TORX 6IP (T6) tip screwdriver.

Note: To avoid damage to screw head, do not overtighten. (Maximum torque: 2 in-lbs).

Replacement Cable for NMN6271, NMN6272, NMN6273, and NMN6274 speaker-mics


12 month warranty

Motorola NKN6611 Replacement Coiled Cable - XP RSM


(Coiled cord and connector only - does not include the speaker-mic head)


Compatible with XP RSM without 3.5mm audio jack

To detach cable from Remote Speaker Microphone (RSM), remove the screw completely before rotating the collar Use TORX 6IP (T6) tip screwdriver
Note: Earlier versions of this cable may require you to insert a thin tool under the screw head to aid in screw removal

Cable Attachment
1. Align the cable connector with the RSM connector and insert into RSM. Ridge on connector faces the front.
2. Hold the RSM with the front facing you, then position the locking screw such that it faces the front.
3. Move the collar onto the RSM and rotate it into the locked position. The locking screw should now be at the right side of the RSM.
4. Tighten the screw using a TORX 6IP (T6) tip screwdriver.

Note: To avoid damage to screw head, do not overtighten. (Maximum torque: 2 in-lbs).

Replacement Cable for NMN6271, NMN6272, NMN6273, and NMN6274 speaker-mics


12 month warranty

Unsupported Browser

We're sorry, your browser (Internet Explorer) is not supported. You will experience technical difficulties if you choose to continue. For the best experience, please open this website using an updated browser.

Continue anyway