Motorola NKN6610 XP RSM Replacement Cable - NMN6274

https://www.magnumelectronics.com/web/image/product.template/127179/image_1920?unique=59620cc
Part Number: NKN6610B

114.27 114.27 USD Motorola Original NKN6610 XP RSM Replacement Cable - NMN6274 114.27

114.27

Contact Us for Pricing

    This combination does not exist.

    Contact Us for Pricing

    Request Quote

    Availability: In Stock

    Free Shipping in U.S. on orders over $299

    Share:

    Motorola Original NKN6610 Replacement Coiled Cable - NMN6274 XP RSM


    (Coiled cord and connector only - does not include the speaker-mic head)


    Compatible with XP RSM with 3.5mm audio jack

    To detach cable from Remote Speaker Microphone (RSM), remove the screw completely before rotating the collar Use TORX 6IP (T6) tip screwdriver
    Note: Earlier versions of this cable may require you to insert a thin tool under the screw head to aid in screw removal

    Cable Attachment
    1. Align the cable connector with the RSM connector and insert into RSM. Ridge on connector faces the front.
    2. Hold the RSM with the front facing you, then position the locking screw such that it faces the front.
    3. Move the collar onto the RSM and rotate it into the locked position. The locking screw should now be at the right side of the RSM.
    4. Tighten the screw using a TORX 6IP (T6) tip screwdriver.

    Note: To avoid damage to screw head, do not overtighten. (Maximum torque: 2 in-lbs).


    12 month warranty

    Motorola Original NKN6610 Replacement Coiled Cable - NMN6274 XP RSM


    (Coiled cord and connector only - does not include the speaker-mic head)


    Compatible with XP RSM with 3.5mm audio jack

    To detach cable from Remote Speaker Microphone (RSM), remove the screw completely before rotating the collar Use TORX 6IP (T6) tip screwdriver
    Note: Earlier versions of this cable may require you to insert a thin tool under the screw head to aid in screw removal

    Cable Attachment
    1. Align the cable connector with the RSM connector and insert into RSM. Ridge on connector faces the front.
    2. Hold the RSM with the front facing you, then position the locking screw such that it faces the front.
    3. Move the collar onto the RSM and rotate it into the locked position. The locking screw should now be at the right side of the RSM.
    4. Tighten the screw using a TORX 6IP (T6) tip screwdriver.

    Note: To avoid damage to screw head, do not overtighten. (Maximum torque: 2 in-lbs).


    12 month warranty

    Unsupported Browser

    We're sorry, your browser (Internet Explorer) is not supported. You will experience technical difficulties if you choose to continue. For the best experience, please open this website using an updated browser.

    Continue anyway