Voice Siren System Components
Whelen WPS 2900 Siren Series 
Omni-Directional Sirens provide clear, uniform and powerful 360° warning instantaneously throughout their coverage area. Unique stackable omni-directional speaker cells allow you the flexibility to match economy and sound output to meet your needs. All models include a complete speaker assembly and an electronics assembly contained within a natural finish aluminum cabinet. Standard warning tones provided are designed to operate in the highly effective, low frequency range for the most efficient and powerful warning at distances from the system.
Benefits
- Indiscriminate warning - you do not need an expensive pager or cell phone to be warned. Voice sirens will not discriminate. They will warn everyone within a specified area.
- Wireless activation of sirens, even in the absence of AC power
- All sirens are battery-operated
-
Solar charging systems available for areas absent of AC power
- Clear and effective public address broadcasting
- Clear and concise ALERT and INFORM. ALERT with a tone, INFORM with a digitized custom voice message
- Voice messages can be customized for language and duration appropriate to your community, with your instructions
- Standard message memory storage is 240, 480 or 960 seconds
- Coastal area populations often increase substantially, depending upon what time of year it is. Voice sirens eliminate confusion for the tourist, before, during and after an event
- Individual control over remote sites. Sometimes it is not necessary to warn all, just a few.
Features
- Specifically designed for coastal applications
- Choice of 1 to 10 omni-directional speaker cells assembled in a vertical column. Whelen siren speaker arrays are made of UV stabilized LEXAN® 3433R. This material will stand up to moisture, salt and wind better than competitor's metal speakers.
- Ten models, 109dBC to 129dBC
- Omni-directional aero-dynamic design allows for high wind conditions
- Temperature-compensated battery charger
- Each speaker cell uses one EZ-PULL 400 watt driver, eliminating distortion and power loss that occurs from mixing the outputs of multiple speaker drivers in a cell - as found in competitive systems
- The EZ-Pull driver is Whelen Engineering's latest innovation. A handled plate connected to the 400 watt driver is an industry first. Serviceability of Whelen sirens has never been easier.
- Local controls or Remote controls
- One to 19 power amplifiers, depending upon the model.
- Electronic siren controller
- Tone generator
- Timer
- Local control push buttons
- Battery switch
- SI Test - Whelen's silent test feature is unique to Whelen only
- Battery tray
- Lightning arrestor
- Six standard public warning tones - Wail, Whoop, Attack, Hi-Lo, Alert, Airhorn
- 50' cable
- Pole top mounting bracket
- Aluminum cabinet with Whelen-manufactured AC temperature-compensated 10 amp battery charger, Whelen-manufactured power amplifiers, Whelen-manufactured electronic siren controller, Whelen-manufactured tone generator, timer, local control push buttons, battery switch, low battery alarm and lightning arrestor.
Indoor Warning IPS400/800
- The IPS400/800 contains within its two-compartment, natural finish aluminum cabinet; Electronic Siren Controller, one or two power amplifiers, a System Driver Board, two gel-cell batteries and battery charger.
- Siren and Voice warning may be distributed from the IPS400/800 to individual speakers within a building.
- Each 400 watt power amplifier has four 100 watt channels. Each 100 watt channel may be used with one 100 watt speaker driver or a combination of transformer coupled speakers of lower power.
- A wide variety of speakers are available, including special speakers for explosive atmospheres.
- The deployment of multiple IPS400/800 systems, typically managed by wireless control, offers significant savings compared to central amplifier systems.
- Six warning tones and public address, standard.
- Local controls, standard.
- Battery power source for up to 30 minutes of continuous operation, without AC power, standard.
- One-way and two-way radio controls that are fast, secure and reliable.
- Optional Remote Station Digital Voice Module, RDVM, stores up to 16 pre-recorded messages of variable lengths. Standard message memory storage is 240 or 480 seconds. Messages may be activated by a brief radio command.
Brochure - Whelen IPS400/800
E 2010 Central Station Control
Control and monitor your siren warning system from a central location. The E2010 allows the user to issue system activations and collect remote siren status via RF link or landline.
Features Whelen’s field proven COMM/STAT™ Command and Status Monitoring protocol, for fast, secure, and reliable communication.
The E2010 supports all of the features that are available in Whelen’s High-Power Voice and Siren product line, from individual Command selection to user programmed command scenarios or Call Keys. With the selection of one Call Key, an operator may prompt the encoder to issue multiple commands.
With the included computer accessory software, you can connect the E2010 to a PC for Windows® based programming and data archiving. Data is available through an ACCESS® data base.
E2010 Features
- 4 line by 40 character backlit LCD display
- 16 “HOT” Call Keys
- 40 Auxiliary Call Keys
- 2 Time-Of-Day Call Key Activations
-
4 Remote Input Call Keys
- Automatic System Polling
- Internal Alarm Tone
- 2 Contact Closure Outputs for Alarms
- Base Radio Interface
- Channel Grant Input for Trunking Radio Systems
- Optional FSK Signaling
- Security Keylock
- Printer Port
- Battery Backup for Time and Date
- Rugged, Membrane Keyboard
- Microphone for Public Address E2010
Computer Interface Features
-
CD-ROM and 9 Pin “D” Cable
included -
“Windows®” Based Call Key
Programming - Add Call Key Descriptions
-
Hard Drive Archive of All Siren
Activity -
Selective Printouts for Status
by Siren Location or Date
